Product Description
Mobile Electric Hydraulic Lift Table Platform Vehicle
Liftables are commonly used to position loads at an ergonomic height for packaging and assembly operations, to interface with machinery, and to change elevations of various logistics infrastructures.
Standard lift tables are those in which the capacity is between 2,000 and 6,000 Ibs, have a lowered height around 7", vertical travel of 24" to 60" and platform widths of 24" to 72". Standard lift tables make up the bulk of liftable applications and can be customized to fit specific requirements such as tapered toe guards for pit mounting as well as caster frame assemblies.
Mobile lift tables come in a number of different powered and non-powered varieties. Both the vertical and horizontal motion can be manual, fully electrio or a combination of the two. Mobile lift tables, also called lift carts, that are manually pushed and elevated through the use of a manual foot pump are economic work positioning solutions for light duty assembly operations where the product is transported from work cell to work cell throughout the process and the changes in elevation are minor. On the other side of the spectrum, electric-hydraulic liftables paired with an industrial pallet truckfind great utility in die handling applications from die racks to presses.
Rotating lift tables, commonly referred to as work positioners, are used in applications where access to all sides of the load is required. While a rotating top can be mounted to a standard liftable, lifts of this designation have been specifically designed to incorporate a rotating platform and feature reduced lowered heights. This reduction allows for greater access to tall palletsizes as well as accommodating greater differences in operator height.
Low profile lift tables are used in applications where the lowered height is critical, ramping on to or off of the platform is required and a pit mounted solution is not feasible. With lowered heights around 3", the platform is accessible by use of a standard pallet jack. The constraints of a low profile design do not allow for heavy duty or high cycle applications as the scissor arms have to be narrow enough to fit within a confined space limiting the capacity to around 3,000 lbs.
Stainless steel lift tables are for use in wash down applications, primarily in the food and pharmaceutical industries. Depending on the specific conditions of the application, a combination of stainless steel, special paints and other materials are used to meet the right combination of corrosion resistance and cost. Remote power units are typical for these types of applications and be housed in stainless steel.
The lift tables can improve the efficiency of cargo handling. It can quickly and safely unload goods from trucks or trains, which is faster and more efficient than using traditional manual loading and unloading methods. It greatly shortens the loading and unloading time of goods, improves work efficiency, reduces waiting time during loading and unloading, and saves time costs.
Adapted to various types of vehicles, the platform can automatically lift and adapt to trucks and trains of different heights, which means that regardless of the transportation mode of goods, the hydraulic loading and unloading platform can easily handle it. It can improve the safety of goods. Traditional manual loading and unloading of goods carries a high risk of accidental injury, especially when the goods are heavy or irregular. The hydraulic loading and unloading platform can ensure that goods will not be damaged or fall during unloading, reducing the impact of vibration on the goods, not only protecting the integrity of the goods, but also preventing personnel from being crushed. It can reduce labor costs, and the use of hydraulic loading and unloading platforms can reduce the number of manual loading and unloading of goods, thereby reducing labor costs. Due to the automatic lifting of hydraulic loading and unloading platforms, operators only need to operate from a safe location without climbing onto trucks or trains for loading and unloading operations. This can reduce the risk of fatigue and injury for operators.
1. The foot rod connects the hydraulic system to lift the platform to the required position;
2. Overload protection device, namely pressure limiting valve, automatically controls the car body to work within the limited load range to protect the safety of the car body and users;
3. The wheel is made of polyurethane material, anti-noise, anti-slip and anti-wear;
4. The platform descending control lifts the wrench upward to make the oil pump drop smoothly after pressure relief.
FAQs
Are you a factory or trading company?
We're factory with over 12years exporting experience.
What's the MOQ?
1UNIT,the more,the better.
What's the payment terms?
<USD4999: 100%TT in advance.
>USD5000: 50%TT in advance,balance before shipment.
Do you offer OEM&ODM service?
Yes,like lifting capacity, lifting height, size of platform,painting color,logo,manual etc.
What's the delivery time?
15~20days after down payment
What's the quality warranty?
24 months.Offer free parts for replacement.
How can I get the after-sales service?
We offer videos,pictures and technical guidance immediately.
What's your QA&QC policy?
3times 100% inspection before shipping.
Can you tell me your clients in my country?
Of course. But only after the permittance of customers.
(Y)
Request a Quote
